• 5.5" Draft Faucet Shank, Side View
1 1

Krome Dispense

5.5" Draft Faucet Shank

5.5" Draft Faucet Shank

$22.50 USD
$22.50 USD
Sale Sold out
Shipping calculated at checkout.

Low stock: 4 left

Comes with a back nut, plastic collar, and a welded 3/16" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3/8".

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Dimensions:

  • 6-1/4" - Total Length (Tip to Tip)
  • 5-1/2" - Shank Length (Without Nipple)
  • 4-1/8" - Thread Length
  • 5-1/4" - Pass Through Length

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

View full details
Humboldt Beer Works Front Door

Humboldt Beer Works

Humboldt Beer Works is located in Old Town Eureka, on California's beautiful & rugged North Coast.

Locally owned and operated since 2011, and re-established in 2018, we've been committed to offering the highest quality ingredients and equipment, as well as the advice you need to succeed.