• 2.5" Draft Faucet Shank
1 1

Brewmaster

2.5" Draft Faucet Shank

2.5" Draft Faucet Shank

$15.00 USD
$15.00 USD
Sale Sold out
Shipping calculated at checkout.

Low stock: 1 left

Comes with a welded 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 1-1/4" of length to pass through your wall or fridge door, due to the length of the collar and back nut.

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Dimensions:

  • 3-1/8" - Total Length (Tip to Tip)
  • 2-1/2" - Shank Length (Without Nipple)
  • 1-1/8" - Thread Length
  • 1-1/4" - Pass Through Length

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

View full details
Humboldt Beer Works Front Door

Humboldt Beer Works

Humboldt Beer Works is located in Old Town Eureka, on California's beautiful & rugged North Coast.

Locally owned and operated since 2011, and re-established in 2018, we've been committed to offering the highest quality ingredients and equipment, as well as the advice you need to succeed.